| Numéro de l'article: | 3100-50SW.F-8033 |
| Disponibilité: | En rupture de stock |
Seat height
The standard height is either 48, 50 or 52 cm (other heights available on request).
If necessary the seat frame height can be increased by 30, 40, 60 or 80 mm by simply adding on the appropriate extensions (see accessories).
Adjustment: fluid inclination adjustment up to 20° via eccentric quick-release fastener
Seat shape: standard "F" = flat; or optionally "S" = S-shape
Backrest adjustment: fluid adjustment of height via knurled screw, fluid adjustment of inclination via pneumatic mechanism with release lever.
Frame: high-gloss chrome-plated or black powder-coated
Stackability: up to 8 chairs, free standing
Chair frame
The chair frame is crafted from 2 mm thick steel tubing with a diameter of 20 mm in black powder-coated finish (other colours available on request). All chair frames are fitted with protective bars to enable secure stacking and floor-friendly black plastic feet.
Seat inclination
The seat inclination can be fluidly adjusted by up to 20° by means of a sturdy, user-friendly eccentric quick-release fastener. Once set, the position is firm and steady.
Seat shape
Standard shape "F" with rounded front edge
The rounded front edge forestalls leg fatigue and circulatory problems. The back support forestalls damage caused by poor sitting positions.
Seating surface: width x depth = 44 x 42 cm.
Backrest adjustment
The backrest inclination is adjusted by means of a TÜV-tested safety pneumatic spring with release lever with break-proof bearing. Thanks to extreme lift of the pneumatic spring, the backrest provides support even when seated in the foremost seating position. The removable backrest can be adjusted in height fluidly and silently by means of a knurled screw. The position set is firm and steady.
Seat design
The seat, mounted on elastic rubber elements, is crafted from robust multi-ply beech wood and features ventilation perforation holes. The "F" (flat profile) and "S" (S-shaped profile) seats have a 4 cm thickness of high-quality breathable foam rubber cushioning, a foam rubber thickness of 2.5 cm being optionally available.
Backrest
The backrest pan is made from multi-ply beech wood and covered with a synthetic material covering. The backrest cushioning is a 3 cm thick layer of high-quality breathable furniture-grade foam rubber. Its moveable mounting on back upright allows it to adapt perfectly to the user's posture.
Fabric cover
In January 2014 we started to supply our chairs with a new and better fabric of flame-retardant Trevira® CS with abrasion resistance of 100,000 rubs (Martindale).
Standard colour: anthracite (flecked with grey, insensitive to dirt)
From a distance of 2 - 3 m on the difference between old and new fabric cannot be discerned any more.
Fabric colours
2 or 3 coloured melange: red, wine-red, green, blue, anthracite (standard)
solid coloured: black
Other colours and fabrics are available on request. We recommend fabrics that are 2 or 3 coloured, as they are insensitive to dirt.
Stackability
All Kolberg orchestra chairs can be stacked, free-standing. Sturdy plastic covers protect the chair frames. Stacking bars ensure balance and prevent contact between frame and upholstery.
